Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
2011 Mercury 225hp OptiMax 2 Stroke Outboard Motor
Power tilt and trim work
25″ shaft length standard rotation
Compression is between 97 and 110 PSI
Engine starts and runs perfectly, ready to be installed onto your boat
The Outboard engine comes with controls, gauges, wiring harness and prop.
$2,700
Only logged in customers who have purchased this product may leave a review.
2003 Suzuki 150hp, 25″ extra long, 2 stroke, oil injected, freshwater outboard
2003 Suzuki fuel injected, oil injected, 25″ or extra long, outboard motor. it is in very nice condition, there are no scratches and no sun fading. The way you see it is how clean it looked when we took it off the boat. Prop and control is included. We have done the following to this motor, we changed the oils and pressure and vacuum tested the lower unit, changed the water pump impeller, performed a leakdown test and all the cylinders were less than 3%. Ran and checked over the engine. The leakdown test is more accurate than a compression test, it has a gauge and you put air pressure in the spark plug hole and measure the percentage of air leaking past the piston and rings by rotating the flywheel. On this test 0% is the best 100% the worst, typically over 10-15% shows signs of wear and anything over 20% will start having a running issu
2003 Honda 225HP 4 Stroke Outboard Engine 25 Shaft
515 Hours
The Outboard engine comes with controls, gauges, wiring harness and propeller.
The Outboard Motor is working perfectly in good conditions with 3 months warranty, Motor has been inspected and ready to mount and run.
2002 Nissan 70hp outboard motor. Standard 20” shaft length with power tilt and trim and desirable oil injection. Last of the super reliable, simple and light weight 2 stroke motor.
This is a reliable made in Japan Nissan power for little money. Basically same reliability and design of the Yamaha 70hp of its time without the Yamaha pricing.
Motor runs strong with 125lbs compression on all 3 cylinders. Tilt and trim works fine and lower unit is free of water and metal shavings. This is a nice used motor which should serve it next owner well if properly cared for.
Clean Used 2002 Evinrude 200 HP V6 DFI 2 Stroke 20″ (Long Shaft) Outboard Motor. Model number: E200FPLSNF. Weight – 514 lbs. 130-135 psi compression on all 6 cylinders. Midsection has been replaced, so ID tag does not match the rest of the motor. New Impeller, Gear Oil, and Spark Plugs. Electric Start. Power Tilt/Trim.
WhatsApp us
There are no reviews yet.