Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
1994 115hp 25 inch Shaft Yamaha V4 engine which presents well both visually and mechanically. It comes complete with a Stainless Steel Prop, controls and gauges. The engine has Even compressions and passes all other mechanical checks. The engine runs smooth and is in good condition. The engine comes serviced and with a 12 month Warranty.
$1,900
Only logged in customers who have purchased this product may leave a review.
Clean Used 2002 Evinrude 200 HP V6 DFI 2 Stroke 20″ (Long Shaft) Outboard Motor. Model number: E200FPLSNF. Weight – 514 lbs. 130-135 psi compression on all 6 cylinders. Midsection has been replaced, so ID tag does not match the rest of the motor. New Impeller, Gear Oil, and Spark Plugs. Electric Start. Power Tilt/Trim.
2003 Suzuki 150hp 25in remote 2 stroke outboard motor
Year: 2003
Make: Suzuki
Model: 150hp Remote
Serial# 15003-371585
Shaft length: 25in X-Long
Stroke: 2 stroke
This motor was just serviced:
-Compression: 100PSI on all 6 cylinders
-Lower unit pressure tested good
-New fuel filter
-New spark plugs
-New impeller
-New lower unit lube
-Cleaned fuel system
Hours: N/A
Comes with prop and conceal mount control box with warming gauge
Does not come with throttle/shift cables
200 hp Yamaha hpdi 2000
25 inch shaft
Good running motor
Lower unit oil is clean
Trim works great
Compression reading is110 110 110 110 110 110 psi
This motor have service period
This motor included prop and control
2003 Suzuki 150hp, 25″ extra long, 2 stroke, oil injected, freshwater outboard
2003 Suzuki fuel injected, oil injected, 25″ or extra long, outboard motor. it is in very nice condition, there are no scratches and no sun fading. The way you see it is how clean it looked when we took it off the boat. Prop and control is included. We have done the following to this motor, we changed the oils and pressure and vacuum tested the lower unit, changed the water pump impeller, performed a leakdown test and all the cylinders were less than 3%. Ran and checked over the engine. The leakdown test is more accurate than a compression test, it has a gauge and you put air pressure in the spark plug hole and measure the percentage of air leaking past the piston and rings by rotating the flywheel. On this test 0% is the best 100% the worst, typically over 10-15% shows signs of wear and anything over 20% will start having a running issu
WhatsApp us
There are no reviews yet.